PRODUCT DESCRIPTION

Turf Cote – 400  is a superior  coating based  on Acrylic Rubber blend combined  with premium  resins, pigments  fillers and solvents. This coating has been specially developed  for all weather  tennis  courts  or any exposed  Decks, Pathways  etc.  It has  excellent weathering  properties  and protects  the surface from deterioration   against water and abrasion.

APPLICATIONS

Ideally  suited  for tennis  courts,  badminton   courts, basket   ball  courts,   sports   complexes,   pathways, pavers, driveways, roads, runways. It can be used on new as well as for remedial work.

METHOD OF APPLICATION

Always  stir   the   contents   well  before   use.  New surfaces   and  highly  porous   surfaces   need  to  be primed  with CHEMISTIK AC – 10  and allowed to dry for 3 – 4 hours. Turf Cote – 4oo  can be applied by brush or  rollers.   Apply  first  coat  on  prepared    surface moving  brush / roler    in  one direction.   Second  coat apply moving brush  across the first coat or at right angles.   Inter coating    interval   should   not   exceed more than 8-10 hours.

CLEANING OF TOOLS

Wash all containers,  brushes,  tools and hands  with Mineral Turpentine  only.

STORAGE

Being inflammable,  it should be stored  in cool, dry place away from heat and naked flames.

PACKING

4 Ltrs. & 20Ltrs.

ADVANTAGES

• Its   flexible   film  can   withstand    temperature variations.
• Resists growth of Algae & Fungus.
• Tough   &  Flexible   Film   is  highly   abrasion resistant.
• Excellent barrier  against water. Single component  ready to use. Washable  and Scrub resistant. Will not peel deform or soften.
• Excellent   adhesion    to   all  types   of  building materials.
• Decorative:    available   in  selected   shades    on request.

PREPARATION

Broken  surfaces   to be repaired   with  Floor Resurfacer.  Joints  and  cracks can be repaired  with CHEMISTIK Conjoint – 50 Polymeric Sealant.
Wire brush  and clean all foreign matter  such as dirt, grease, laitance, mortar  dropping,  algae, fungus and loose flaking coatings.  Wash  and  clean the surface with water and detergents  thoroughly.
Surface to be treated  should be firm and clean prior to  coating.  New surfaces  to  be cured  for  28  days before the coating is applied.
Do not work when ambient  temperatures   are below 5°C and above 45°C.
Application  should not commence  during  inclement weather  or when rain appears imminent.

PRECAUTIONS

The surface  to be treated  should  be clean, dry and moisture  free. Cannot be applied  on damp  surfaces. Working areas should   be  well ventilated, as  the fumes  of the  evaporation of solvent  should  not be inhaled.  Smoking  should  not be permitted during application.