PMBM (Polymer Modified Bitumen Membrane)
INTRODUCTION
We at Chemistik are actively engaged in developing a wide range of high quality products to perform under some of the most hostile environments. We are constantly developing, testing, improving and introducing quality products to provide better durability, light weight and long term protection.
APPLICATIONS
The Membranes Polyethylene burn off film melts during torching by applying the correct application temperature, the embossed surface of the membrane melts indicating the correct temperature and helping in vapour diffusion and bond to the surface. Chemistik Membranes are designed to be used in a wide range of applications for waterproofing such as foundations, basements all types of roofs and terraces flat or curved, AC & GI Roofs, Mangalore Roofs (inside), roof gardens, as an under lay before brick bat or tiling, or Roads and Bridges, aquaducts, tunnels, subways etc. It can also be used to create a temporary pond or shanty roof.
PRODUCT DATA
POLYMER MODIFIED BITUMEN MEMBRANE
PRODUCT DESCRIPTION
Chemistik’s Polymer Modified Bitumen Membranes are prefabricated and whose compound is composed of distilled bitumen, and plastomers, reinforced with woven non-woven polyester fabric. This modified compound offers good ageing properties, cold flexibility, durability and elasticity. It has a burn off Polyethylene film on both side to prevent the roll form sticking to itself.
ADVANTAGES
⦁ Easy to lay as compared to conventional methods of waterproofing.
⦁ Provides 100% waterproofing to all types of surfaces
⦁ Offers a good static and dynamic puncture resistance
⦁ High tensile strength both longitudinal and transversal
⦁ Very good elongation and fexibility in all weathers.
⦁ It can be overpainted with coloured acrylic or aluminium reflective finishes
⦁ Can also be mechanically fastened
⦁ Can be fully bonded, spot bonded or loose laid.
⦁ Economical and long term protection
⦁ Tiles can be laid over it
PACKING
19 Rolls to a pallet.
*Tolerances on nominal value are according to EN norms on lower face.
Various grades and thickness’s is available for different end uses on request or as suggested by our technical engineer
STORAGE
Store in a cool dry place away from direct sunlight Rolls should be kept standing