EP RO 400 (Epoxy Red Oxide Primer)
A two-component, red oxide epoxy primer containing red oxide pigment, Chemistik EP RO 400 has excellent adhesion to steel and other metal surfaces
Used as a base coat (primer) prior to Epoxy Top Coats.
METHOD OF APPLICATION
It should be applied only on dry and clean surfaces where moisture is not present.
It can be applied with brush or airless spray. Chemistik EP RO – 400 is a two component packed in two different containers. Stir both the containers thoroughly and separately and mix them in a specified proportion as given.
If the primer requires thinning or if painting tools need cleaning, use EP THIN 200.
All the equipments should be cleaned thoroughly after use.
Avoid inhalation of solvent vapour or paint mist and contact of contents of liquid paint with skin and eyes. Provide face ventilation when working with solvent borne coatings in confined spaces or stagnant air. Provide respiratory, skin and eye protection. Do not smoke in the area and away from open flames, lights etc.
- Good adhesion and flexibility to the surfaces applied.
- It has good corrosion resistance in chemical environment.
- It is a metal primer used in pulp, paper mills, refineries, petrochemicals and metal and engineering industries.
The surface should be free from loose particles of paints, dust, rust, grease etc.
The steel surfaces should be degreased and blast cleaned.
Use only where application can proceed at a temperature above 100°C.
CLEANING OF TOOLS
Clean hands, tools etc. with EP THIN 200
Store in a cool, dry place away from direct sunlight
4, 20 Ltrs.