EP Plus – 800 (High Build Epoxy Flooring)


EP-Plus 800 is a high build self smoothing, Seamless Epoxy resin floor finish. It can be applied on to most surfaces to provide a waterproof, dustproof and hard wearing surface with excellent chemical resistance.
It also provides excellent resistance to oil i:ease, moisture, dirt, etc. Itis easy to clean and facilitates easy maintenance of floors and also extends their life.


As a high build protective coat for concrete floors where high abrasion resistance, chemical resistance, dust-free and hygienic conditions are needed. It can be used very effectively in garages, light industrial factories, hospitals , operation theatres , pharmaceuticals , food or dirnks industries, abattoirs, electronics factories, warehouses, workshops & sports centres. Can also be used in large water reservoirs ,spray ponds etc.,as aheavy-duty waterproofing coating.


Once the surface is prepared as per the instructions, the surface shouldbe primed with primer coat of EP Seal-100 (Epoxy Sealer Coat) which is supplied in two packs, Resin & Hardner. Stir the individual contents and mix them thoroughly before use. Same method is to be adopted for EP PLUS 800. Allow primer to dry for about 2 hours and then commence applying the first coat of EP PLUS 800 followed by second and subsequent coats tobe applied within 2- 3 hours interval between each coat Intercoating interval should not exceed more than 8 hours. For very high gloss, final coat EP Clear 444 is recommended tobe used as a top coat.


Avoid inhalation of solvent vapours and avoid direct contact with skin and eyes. Provide proper ventilation when working with solvent borne coatings in confined spaces or stagnant air. Provide respiratory skin and eyes protection. Don’t smoke in the vicinity and away from open flames, lights etc


Store in a cool dry place, away from direct sunlight. Do not mix the materials and store as it will cure and gel.


5 Kg., 25 Kg.

  • It gives excellent resistance to dirt, dust and other environmental pollutants.
  • Excellent resistance to oil, grease, petrol and certain chemical spillage.
  • It also gives excellent resistance to most solvents.
  • Excellent abrasion resistance and impact resistance.
  • Very easy to clean and maintain and easy to repair.
  • Easy to mix and apply, seamless coating by brush / mop / roller.
  • Can be used in homes and offices where tiling is not required or is not economical for floors or walls.

New concrete surfaces should be cured for 28 days prior to coating. Old / Existing surfaces should be clean, firm and dry. All laitance curing membranes / coatings should be removed. The surface should be free from dust, loose dirt, oil, grease, etc., and levelled. All pot holes uneven surfaces, cracks, crevices should be repaired with Chemistik Rapid Repair Mortar. Very oily surfaces to be chemically cleaned with Florklin and then rinsed thoroughly and allowed to dry thoroughly before applying primer coat.


Clean hands tool etc. with Chemistik EP Thin 200. The use of barrier creams is also recommended.

EP PLUS - 800